HP HPE7-V01 Daily Practice Exam New 2026 Updated 52 Questions [Q26-Q45]

4.7/5 - (4 votes)

HP HPE7-V01 Daily Practice Exam New 2026 Updated 52 Questions

Use Valid HPE7-V01 Exam – Actual Exam Question & Answer

NO.26 Your customer is planning a Scality RING solution. Approximately 750 TB of data must be stored on the SDS. The customer prefers SSD or NVMe drives.
What is true regarding this solution?

HPE servers, for example, such as Alletra Storage Server 4120, can be used for Scality RING deployments.

The minimum capacity for ordering Scality RING perpetual licenses is 1000TB.

Scality RING Single Site Hardware Lifetime licenses are provided at a lower cost compared to perpetual licenses.

Scality licenses cannot be purchased from HPE.

NO.27 Which statement about designing HPE SimpliVity solutions for high availability is true?

If a stretched cluster is configured, an arbiter should be deployed in both sites.

Standard HA clusters require a vSphere Foundation subscription at minimum.

At least four availability zones should be configured between sites.

If a stretched cluster is configured, an arbiter should be deployed at a third site.

NO.28 Your customer would like to implement Peer Persistence for their HPE Alletra 6000 remote replication configuration.
Which statement is true?

Peer Persistence volumes require both arrays to operate as upstream.

HPE Alletra 6000 arrays are always using iSCSI for synchronous replication.

HPE Alletra 6000 arrays are always using FC for synchronous replication.

Peer Persistence volumes are synchronously replicated over 10Gb or 100Gb IP links.

NO.29 You have proposed that your customer adopts HPE VM Essentials as an alternative hypervisor, but they still want to utilize their existing HPE Synergy 480 Gen10/Plus for existing vSphere workloads.
How can your customer manage both environments from a single management platform?

Use the HPE VM Essentials Manager to manage both vCenter and HPE VM Essentials.

Use the Data Services Connector to connect HPE OneView Composer to HPE GreenLake and HPE VME.

Use the HPE VM Essentials plugin for vCenter to manage both platforms.

Use the HPE GreenLake Data Services disconnected option to manage vCenter and HPE VM Essentials.

NO.30 Your customer has a combination of HPE and non-HPE equipment.
Which is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Management of Pensando cards in the servers.

VLAN visibility of VMware on non-HPE servers.

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

NO.31 Your customer has a combination of HPE and non-HPE equipment.
What is the correct functionality available in Aruba Fabric Composer for this customer’s environment?

Management and monitoring of HPE Alletra Storage MP B10000 arrays.

Management and monitoring of HPE Synergy Virtual Connect.

Configuration of SAN zoning on ArubaOS-CX 8400 switches.

Acceleration of spine-leaf fabric provisioning on ArubaOS-CX switches.

NO.32 Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use as a Peer Persistence enabling platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Alletra 6000 your customer will be able to combine an Active Peer Persistence environment with a one-to-many topology.

With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware.

With HPE Alletra Storage MP B10000 your customer will be able to combine an Active Peer Persistence environment with a one-to-many topology.

With HPE Alletra Storage MP B10000 your customer will be able to use FC for underlying replication.

NO.33 Your customer is using an HPE SimpliVity 380 Gen11 environment that is only managed with on-premises utilities.
How can this solution be integrated into the HPE GreenLake management platform to benefit from the HPE Private Cloud Business Edition features?

By deploying the Data Services Connector VM and importing the cluster to DSCC.

By introducing the cluster as a PCBE setup integrated with DSCC.

By replacing the iLO using the HPE Compute Ops Management activation process.

By configuring the OmniStack integration with HPE InfoSight.

NO.34 Your customer has provided the CLI output of a switch to show how their devices are connected.
Refer to the output:
show arp
IPv4 Address MAC Port Physical Port State
10.0.255.2 … vlan150 … reachable
10.12.43.1 … vlan1 … reachable
10.0.255.3 … vlan150 … reachable
Total Number Of ARP Entries Listed: 3.
What should you consider while discussing upgrades to your customer’s environment and network components?

The support for VSF stacking functionality.

The support for Overlay networks is required.

The support for IGMP snooping is mandatory.

The support for Virtual Switching Extension is required.

NO.35 You are validating the hardware architecture for an AI solution.
Your customer has requested that you focus on possible upgrades for their HPE ProLiant Compute DL384 Gen12 server.
Which of the following statements is correct?

The GPU performance can be increased by adding more Nvidia GB200 accelerators.

The Superchips on the server include a fixed amount for the memory configuration.

The amount of supported EDSFF drives depends on the selected RAID controller.

The 400Gb NICs can be added if liquid cooling is used with the chassis.

NO.36 You presented a solution to your customer that will replace their legacy HPE BladeSystem.
The new solution is based on the HPE Synergy platform and consists of the following components:
* 5 HPE Synergy 12000 frames
* 2 HPE Virtual Connect SE 100Gb F32 Modules for Synergy
* 8 HPE Synergy 25/50Gb Interconnect Link Modules
* 60 HPE Synergy 480 Gen11
Which statement about the business and financial benefit of the new solution for the customer is true?

HPE Synergy 480 Gen11 compute modules have an extension that will allow the customer to install 4 GPUs in half-height format compute nodes.

HPE Virtual Connect SE 100Gb F32 Module for Synergy can support FC traffic once an upgrade license for each module is added in HPE OneView.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more expansion slots in the form of mezzanine cards.

Compared to the legacy HPE BladeSystem, the HPE Synergy platform supports more interconnect modules, which provides better flexibility and expansion possibilities.

NO.37 Your customer is planning to deploy several HPE ProLiant DL360 Gen11 servers with Windows Server 2025, for a bare-metal use case with no hypervisors.
The customer is concerned about the time it takes to scan and deploy the servers for new firmware and driver updates.
What HPE management tool can be used in this scenario to apply firmware updates to servers, with direct integration to HPE repositories?

HPE OneView

HPE Compute Ops Management

HPE iLO Amplifier

Microsoft Endpoint Configuration Manager

NO.38 One of your customers is planning to refresh their current campus wired and wireless networking equipment.
They are currently moving to a pay-per-use model for their whole IT solution.
They are wondering if there is a possibility to get new networking equipment in this model without capital expenses. They are also interested in moving LAN management to an external service provider. You are presenting HPE GreenLake for Aruba Networking.
Which statement is true for this customer situation?

Aruba networks can be managed by Aruba experts with 24/7 hardware monitoring.

HPE GreenLake for Aruba Networking only offers Aruba software licenses in a subscription-based format.

HPE GreenLake for Aruba Networking is the central monitoring cloud software for Aruba equipment only.

HPE GreenLake for Aruba Networking offers HPE experts support for third-party wireless devices.

NO.39 Your customer is considering HPE Nimble or HPE Primera for use as a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Nimble, your customer will be able to access the protected volume via the target storage array.

With Nimble, your customer will be able to combine an Active Peer Persistence variant with a 1-1 topology.

With Nimble, your customer will be able to deploy Witness/Quorum via OVA image.

With Primera, your customer will be able to deploy Quorum Witness via OVA image.

NO.40 You are designing an HPE solution for SAP HANA. You are considering an as-a-service approach as one of the variants to be proposed to the customer.
What is true regarding HPE GreenLake for SAP HANA?

HPE GreenLake for SAP HANA requires an onsite HPE Alletra Storage MP X10000.

HPE GreenLake for SAP HANA offers billing based on GB of RAM used by SAP HANA.

HPE GreenLake for SAP HANA can be used for SAP HANA instances running in the public cloud.

HPE GreenLake for SAP HANA offers billing based on the amount of users using SAP HANA.

NO.41 Your customer is expecting to see an increase in the amount of data stored on their HPE Alletra Storage MP B10000.
They are asking to create a plan to support a raw capacity of 450 TB all flash.
Refer to exhibit

What change would you recommend to the configuration to achieve this?

Add 100Gb HBAs to B10120 nodes and additional drive shelf.

Replace the QLC drives with higher capacity TLC drives.

Add more QLC drives to the system and change the sparing to minimal.

Replace the nodes with B10120 model and add additional drive shelf.

NO.42 Refer to exhibit from a customer’s Aruba CX switch.
show interface vxlan vni vteps
VNI : 150 VLAN : 150
Routing : Disabled VRF : default
Vxlan-status : operational
VTEPs
Origin Source Destination VTEP-STATUS
static 172.17.255.2 172.17.255.1 static operational
Which statement is true in this scenario?

A static VXLAN setup needs to be created between the peer switches.

An EVPN VXLAN setup will dynamically establish the VTEPs between peer switches.

A Foundation license needs to be applied to the switches to scale the VXLAN configuration.

A VTEP setup requires the same model of the CX switch on each location.

NO.43 Your customer wants to implement a disaster recovery solution for their virtualization workload. They also want to implement a protection method that will protect the workload in case of a site failure.
Their existing environment includes the following configurations:
* All ESXi systems are located in the same datacenter
* vSphere replication is deployed for VM DR
* Some of the VMs are protected with Fault Tolerance
* HPE Synergy 480 Gen11 is a compute platform
* HPE Alletra Storage MP B10000 arrays for storage
* Orchestrated failover for all VMs using VMware tools
The customer plans to replicate the same setup at the second site. The total number of virtual machines that must be protected is 200. Your customer also expects an RPO of 0.
Which component or configuration is a necessary part of a solution that will meet all customer requirements?

HPE Synergy frames from the secondary site added to the logical enclosure configured in the primary site.

Storage policy-based management (SPBM) must be configured for a group of the virtual machines.

Synchronous replication configured between sites to replicate the volumes used to build the datastores.

Asynchronous replication configured between sites used to replicate the volumes used to build the datastores.

NO.44 Your customer is considering HPE Alletra 6000 or HPE Alletra Storage MP B10000 for use in a Peer Persistence enabled platform for their critical workloads.
Which statement about these platforms and their benefits is true for Peer Persistence?

With Alletra 6000 your customer will be able to configure an Active Peer Persistence wizard with a one- to-many topology.

With HPE Alletra Storage MP B10000 your customer will be able to use Peer Persistence to protect workloads running on VMware.

With HPE Alletra Storage MP B10000 your customer will be able to configure an Active Peer Persistence wizard with a one-to-many topology.

With Alletra 6000 your customer will be able to use Active Peer Persistence to protect workloads running on VMware.

NO.45 Your customer has a networking environment based on Aruba CX 8325 switches configured with Quality of Service settings that give higher priority to iSCSI traffic between HPE ProLiant servers and HPE Alletra 6000 storage. They are planning to add HPE Synergy frames with HPE Virtual Connect modules that will connect to the same Aruba infrastructure.
The frames will be deployed in different VLANs. They need to update their environment to provide a lossless fabric for RoCE traffic that will traverse between the HPE Synergy frames and through multiple switches.
Your customer has two sets of Synergy frames in different logical enclosures connected with Aruba CX 8325 switches. They want to update their environment to provide lossless traffic for RoCE traffic.
What is the correct environmental or design change that will meet the customer’s new requirement?

Use RoCEv1 and configure DCBX on the switch facing the CNA in the servers.

Server Profiles should include redundant connections to a RoCE network.

Create DCB queues using server’s operating system utility.

Assign two different priority values to RoCE traffic.