Citrix 1Y0-241 Test Engine Dumps Training With 65 Questions [Q28-Q52]

Rate this post

Citrix 1Y0-241 Test Engine Dumps Training With 65 Questions

1Y0-241 Questions Pass on Your First Attempt Dumps for CCA-AppDS Certified

NEW QUESTION 28
A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.
Which command does the administrator need to run to correctly configure this policy?

HTTP.REQ.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)

NEW QUESTION 29
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?

Interface 1/1 is bound to VLAN 20, and native VLAN is 20.

Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.

Interface 1/1 is bound to VLAN 20, and native VLAN is 40.

Interface 1/1 is bound to VLAN 20, and native VLAN is 1.

NEW QUESTION 30
A Citrix Administrator configured global server load balancing (GSLB) for www.citrix.com, with two ADNS services named Citrix ADC 1 and Citrix ADC 2 in the setup.
Which record does the administrator need to add on the parent DNS server to delegate requests from www.citrix.com to Citrix ADC 1 and Citrix ADC 2?

Canonical Name (CNAME)

Address (A) record

Name Server (NS) record

Pointer Record (PTR)

NEW QUESTION 31
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?

Configure SyncVlan

Turn on fail-safe mode.

Turn on HA monitoring on all interfaces

Turn on Independent Network Configuration (INC) mode.

NEW QUESTION 32
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?

SSL profile

SSL multiplexing

SSL bridge

SSL policy

NEW QUESTION 33
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?

Configure SyncVlan

Turn on fail-safe mode.

Turn on HA monitoring on all interfaces

Turn on Independent Network Configuration (INC) mode.

NEW QUESTION 34
Scenario: A Citrix Administrator manages an environment that has a Citrix ADC high availability (HA) pair running on two MPX appliances. The administrator notices that the state of the secondary Citrix ADC is
‘Unknown’.
What is causing the secondary state to be ‘Unknown’?

The synchronization on the secondary appliance is disabled.

TCP port 22 is disabled between the primary and secondary ADCs.

The administrator made both Citrix ADCs primary.

The remote procedure call (RPC) nodes are incorrectly configured.

NEW QUESTION 35
Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)

Bind the domain to the CS vServer instead of the GSLB vServer.

Configure CS policies that designate a load-balancing vServer as the target vServer.

Configure a CS vServer of target type GSLB.

Bind the GSLB domain to the GSLB vServer.

NEW QUESTION 36
Which step can a Citrix Administrator take to use default compression policies?

Select the compression algorithm (gzip/deflate/identity).

Disable the Citrix ADC compression feature at a global level.

Enable compression on the associated bound services.

Bind the default compression policies to the vServer.

NEW QUESTION 37
Scenario:
POLICY 1:
add rewrite action ACT_1 corrupt_http_header Accept-Encoding
add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1
POLICY 2:
add rewrite action ACT_2 insert_http_header Accept-Encoding “”identity”” add rewrite policy POL_2 “HTTP.REQ.IS_VALID ” ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

bind lb vServer lb_vsrv -policyName POL_1 -priority 110 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST

bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression NEXT -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -gotoPriorityExpression END -type REQUEST

bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -gotoPriorityExpression END -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 80 -gotoPriorityExpression NEXT -type REQUEST

bind lb vServer lb_vsrv -policyName POL_1 -priority 90 -type REQUEST bind lb vServer lb_vsrv -policyName POL_2 -priority 100 -type REQUEST

NEW QUESTION 38
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?

Enable the content switching feature.

Disable the spillover redirect URL.

Bind a certificate.

Bind the default load-balancing vServer.

NEW QUESTION 39
Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.
The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.
Why has the Citrix ADC lost the newly added configurations?

The junior administrator made the changes and did NOT force a failover to save the configuration.

The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.

Both Citrix ADCs in the HA pair restarted overnight.

The Citrix ADC appliances have different firmware versions.

NEW QUESTION 40
A Citrix Administrator needs to match the host name ‘www.example.com’ in all HTTP requests.
Which expression, when used, meets this requirement?

HTTP.REQ.HOSTNAME.EQ(“www.example.com”)

HTTP.RES.HOSTNAME.EQ(“www.example.com”)

HTTP.REQ.HOSTNAME(“example.com”)

HTTP.RES.HOSTNAME.CONTAINS(“www.example.com”)

NEW QUESTION 41
Scenario: The primary content switching vServer has gone down. To troubleshoot, a Citrix Administrator has issued the following command:
> show csvserver CSV
CSV (10.1.100.100:443) – HTTPS Type: CONTENT
State: UP
Last state change was at Mon Jun 29 15:20:43 2020
Time since last state change: 1 day, 06:47:58 610
Client Idle Timeout: 180 sec
Down state flush: ENABLED
Disable Primary vServer On Down: DISABLED
Appflow logging: ENABLED
Port Rewrite: DISABLED
State Update: DISABLED
Default: Content Precedence: URL
vServer IP and Port insertion: OFF
Persistence: NONE redirect: http://www.site1.com/mysite1/maintenance
Backup: vServer-LB-2
Listen Policy: NONE
IcmpResponse: PASSIVE
RHIstate: PASSIVE
Traffic Domain: 0
Based on this output, where will the subsequent request be redirected?

http://www.site1.com/mysite1/maintenance

vServer-LB-2

Backup content switching vServer

10.1.100.100:443

NEW QUESTION 42
Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, a user receives the message below.
SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?

Ensure that users have the certificate’s private key.

Ensure that users have the certificate’s public key.

Ensure that the server certificate is linked to its respective intermediate and root certificates.

Ensure that users have the server certificate installed.

NEW QUESTION 43
A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?
What could be causing this?

Log facility is NOT configured.

TCP logging is NOT enabled.

User-defined audit log is NOT configured.

Log level is NOT enabled.

NEW QUESTION 44
What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

A private key

A certificate revocation list (CRL)

A certificate signing request (CSR)

A certificate key-pair

NEW QUESTION 45
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?

Add a second interface to each Citrix ADC VPX instance.

Configure a failover interface set on each Citrix ADC VPX instance.

Configure LACP on the SDX for the data interface.

Configure LACP on the SDX for management interface.

NEW QUESTION 46
Scenario: The policies below are bound to a content switching vServer.
bind cs vServer vserver1 -policyName CSPOL_7 -priority 100 -gotoPriorityExpression NEXT bind cs vServer vserver1 -policyName CSPOL_5 -priority 90 bind cs vServer vserver1 -policyName CSPOL_9 -priority 110 bind cs vServer vserver1 -policyName CSPOL_4 -priority 120 bind cs vServer vserver1 -policyName CSPOL_8 -priority 210 Policy CSPOL_7 has been invoked.
Which policy will be invoked next?

CSPOL_4

CSPOL_5

CSPOL_9

CSPOL_8

NEW QUESTION 47
Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.
The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.
Which does the administrator need to configure to meet this requirement?

set transform action “host change” -priority 10 -reqUrlFrom “https://vpn.citrix.com/*” -reqUrlInto
“https://server1.citrix.com/*” -resUrlFrom “https://server1.citrix.com/*” -resUrlInto “https://vpn.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://server1.citrix.com/*” -reqUrlInto
“https://vpn.citrix.com/*” -resUrlFrom “https://server1.citrix.com/*” -resUrlInto “https://vpn.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://server1.citrix.com/*” -reqUrlInto
“https://vpn.citrix.com/*” -resUrlFrom “https://vpn.citrix.com/*” -resUrlInto “https://server1.citrix.com/*”

set transform action “host change” -priority 10 -reqUrlFrom “https://vpn.citrix.com/*” -reqUrlInto
“https://server1.citrix.com/*” -resUrlFrom “https://vpn.citrix.com/*” -resUrlInto “https://server1.citrix.com/*”

NEW QUESTION 48
To protect an environment against Hash DoS attacks, which two configurations can a Citrix Administrator use to block all post requests that are larger than 10,000 bytes? (Choose two.)

> add policy expression expr_hashdos_prevention “http.REQ.METHOD.EQ(“POST”)&&
http.REQ.CONTENT_LENGTH.GT(10000)”
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 100 END -type REQ_OVERRIDE

> add policy expression expr_hashdos_prevention “http.REQ.METHOD.EQ(“POST”)&&
http.REQ.CONTENT_LENGTH.GT(10000)”
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE

> add policy expression expr_hashdos_prevention “http.REQ.METHOD.EQ(“POST”) ||
http.REQ.CONTENT_LENGTH.GT(10000)”
> add responder policy pol_resp_hashdos_prevention expr_hashdos_prevention DROP NOOP
> bind responder global pol_resp_hashdos_prevention 70 END -type REQ_OVERRIDE

> add policy expression expr_hashdos_prevention “http.REQ.METHOD.EQ(“POST”) ||
http.REQ.CONTENT_LENGTH.GT(10000)”
> add rewrite policy drop_rewrite expr_hashdos_prevention DROP
> bind rewrite global drop_rewrite 70 END -type REQ_OVERRIDE

NEW QUESTION 49
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?

The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.

The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.

The service monitor will take precedence over Metric Exchange Protocol (MEP).

The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).

NEW QUESTION 50
Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:
> add policy dataset Admin_group ipv4
> bind policy dataset Admin_group 192.168.149.10 -index 11
> bind policy dataset Admin_group 192.168.149.39 -index 12
> bind policy Admin_group 192.168.149.49 -index 13
> add responder policy POL_1
“!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(“Admin_group”))”
RESET
> bind lb vServer lb_vsrv_www -policyName POL_1 -priority 100 -gotoPriorityExpression END -type REQUEST What will be the effect of these commands?

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.

All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.

NEW QUESTION 51
Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.
Why is the administrator unable to see all 100 virtual servers?

The nsroot passwords are NOT the same across all the Citrix ADCs.

Citrix ADM is using a free license.

Additional Citrix ADM systems need to be deployed to see all virtual servers.

The Citrix ADC and Citrix ADM firmware versions are NOT the same.

NEW QUESTION 52
Scenario: A Citrix Administrator manages an environment that has three SSL websites, all serving the same content.
www.company.com
www.company.net
www.company.org
The administrator would like to consolidate the websites into a single, load-balanced SSL vServer.
What can the administrator bind to use a single SSL vServer?

A wildcard certificate to a single SSL vServer

A wildcard certificate to a content-switching vServer

The certificate of each website to a single SSL vServer

A multiple SAN certificate to a single SSL vServer