Salesforce OMS-435 Study Guide Archives Updated on Aug 22, 2022 [Q21-Q42]

Rate this post

Salesforce OMS-435 Study Guide Archives Updated on Aug 22, 2022

Download OMS-435 Mock Test Study Material

Q21. …… configure Additional input to send exactly the same data? Assume that the develop checked Send Only Additional input.

A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q22. Which two of these options can a developer use to retrieve data from a Salesforce object?
Choose 2 answers

A DataRaptor Load Action

A DataRaptor Extract Action

A Lookup Input Element

A DataRapt or Post Action

Q23. A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?

DataRaptor Transform

DataRaptor Extract

DataRaptor Load

DataRaptor Turbo Extract

Q24. A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?

The DataRaptor Action did not have the add response Ro Response JSON property set to true.

The Response cannot be previewed directly.

A Response Action was not added to the integration Procedure.

The AccountId used for the preview is invalid.

Q25. A developer needs to configure a calculation procedure to calculation the sum of the entire Baseprice.
What is the most efficient way for the developer to meet this requirement?

Create a Postprocessor apex class to calculate the sum.

Add an Aggregation Step as SUM (BasePrice)

Add A Calculation Step as SUM (BasePrice).

Create a Preprocessor class to calculate the sum

Q26. Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action’s HTTP URL?

%DRReadCase: CaseNumber%

((DRRCase, CaseNumber))

MTTOPDetCaseDetail: CaseNumber%

((CaseNumber))

Q27. A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.

When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]”, How should the developer address this issue?

SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure

The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname

The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action

The valid field names should be added in the Domain object field in the DataRaptor

Q28. What should a developer’s first step be when troubleshooting whether a DataRaptor Extract is retrieving data?

Go to the Lightning Console and reload the page to test.

Go to the PREVIEW tab In OmniScript to test.

Deactivate the card and layout, and go to the PREVIEW tab for the card to test.

Add a key/value pair in the DataRaptor to test it.

Q29. A developer writes an OmniScript that includes a DataRaptor that updates the Account statue based on information provided from the OmniScript. The information must be updated only if the Account record already exists. Otherwise, a new account must be created.
How should the developer accomplish this task?

Populate the Lookup object and Lookup fields

Check the Upset key and is required for Upsert checkboxes on the Account id field

Check the Upsert key checkbox on the Account Status field

Check Overwrite Target for all Null input checkbox on the Account id field

Q30. A)

B)

Option A

Option B

Q31. Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?

Action1. BlockB. Block A

Action1: BlockB. Block A

BlockA: BlockB. Action 1

BlockB: BlockB. Action1

Q32. A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard’s records In a Datable How should the developer configure the parent FlexCard’s Node?

{Records{0}}

{Records}

{Params, records}

{Recorded}

Q33. An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.
Which two configuration errors could cause this? Choose 2 answers

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.

The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

Q34. A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.
Which factor would lead the developer to this decision?

The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.

Another team member is developing new action, fields and styling for the current version of the FlexCard.

The new and current versions will be displayed together on the same target.

All instance of the FlexCard must be updated with the changes.

Q35. Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

Q36. A company wants to allow agents to send customers a quote for signature. The quote is a documents created using a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in an OmniScript?

DocuSign Envelope Action

PDF Acwm

DocuSign Signature Action

Email Action

Q37. An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?

Use a Remote Action that calls the XMLStreamReader class

Use a Remote Action that calls the XMLStreamWriter class

Use a DataRaptor Transform to convert JSON to XML

Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.

Q38. A healthcare company wants to enable its subscribers to add, edit, or delete dependents related to their policy Community portal. The developer on the project decides to use an MniScript.
How should the developer configure the OmniScript to provide this functionality?

Use an Edit Block element configured with Remote Actions.

Use an Edit Block element configured with SOQL statements.

Use an Input Block element and a DataRaptor Post Action element.

Use a Text Block element and a Remote Action element.

Q39. A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.
What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage”

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ”Community”

Q40. A developer is building an OmniScript and needs to save to Salesforce and to an AWS Order Management system.
Which OmniScript element could save all of this data?

DataRaptor Post Action

HTTP Action

Integration Procedure Action

DataRaptor Load Action

Q41. A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers

The Data Node field for the FlexCard is empty.

The RecordId in the Test Data Source settings ins for the wrong record type.

The attribute haven’t been configured to pass the data to the fields.

There is not Salesforce record for the FlexCard based on the RecordId in the layout’s Test Data Source Settings.

Q42. What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

Loading …

Salesforce OMS-435 Exam Syllabus Topics:

Topic	Details
Topic 1	Test and Troubleshoot Components in the OmniStudio Interaction Console Configure FlexCard Flyouts to Display Additional Data
Topic 2	Connect an Interaction Launcher to a Console Toolbar FlexCards and Omnistudio Interaction Consoles
Topic 3	Integration Procedures and OmniStudio Data Tools Explore OmniStudio Tools and Resources
Topic 4	Build Calculation Matrices and Procedures Build an OmniStudio Interaction Console
Topic 5	Configure Fields to Display Data and Configure Actions to Launch OmniScripts from FlexCards Configure OmniScript Elements such as Type Ahead Blocks
Topic 6	Configure Element Properties such as Branching Conditions Learn the Benefits and Features of OmniStudio LWC and Component Types
Topic 7	Use a DataRaptor to Transform FlexCard Data JSONs Design and Build Parent and Child FlexCards
Topic 8	Build Integration Procedures and DataRaptors for OmniScripts and FlexCards Assign Data Sources to FlexCards, Including External Data Sources
Topic 9	Learn How OmniStudio uses Salesforce sObjects and Fields Design and Build Simple and Complex OmniScripts