[Oct 14, 2022] Fully Updated Dumps PDF – Latest NS0-183 Exam Questions and Answers [Q18-Q41]

Rate this post

[Oct 14, 2022] Fully Updated Dumps PDF – Latest NS0-183 Exam Questions and Answers

100% Free NS0-183 Exam Dumps to Pass Exam Easily from Real4exams

NO.18 You are installing a pair of Cisco Nexus 3132Q-V cluster switches and receive several syntax errors when the reference configuration file (RCF) is applied.
In this scenario, what are two reasons for these errors? (Choose two.)

An RCF file for a different version has been loaded.

The switch was not in maintenance mode.

The RCF was already applied.

Cables were not removed before applying the RCF.

NO.19 You install a new 2-node FAS8200 switchless cluster. You want to reach all necessary management LIFs and SPs for this cluster.
How many management IP addresses do you need in this scenario?

NO.20 You have installed and configured a new AFF C190 cluster with ONTAP 9.7. Your customer wants you to install the latest version of ONTAP.
In this scenario, what are two methods to update ONTAP? (Choose two.)

Use the cluster image package get and cluster image update commands.

Use a USB drive with the new software image and let ONTAP automatically boot.

Use ONTAP System Manager to download and install the new software image.

Use ONTAP System Manager to upload and install the new software image.

NO.21 You have just installed a new AFF A220 4-node cluster with ONTAP 9.5 for a customer.
Which two cluster switches are supported in this scenario? (Choose two.)

Cisco Nexus 5596UP

Brocade 6510

Cisco MDS 9148S

NetApp CN1610

NO.22 You configured AutoSupport and are trying to send a full AutoSupport message to NetApp.
You use the autosupport history showcommand and see the output shown in the exhibit.

The customer confirms that the AutoSupport settings are correct.
Which two actions will solve this issue? (Choose two.)

The customer needs to enable AutoSupport for both nodes.

The customer needs to exclude the two nodes from the attachment-size limitation.

The customer needs to change the transport protocol to HTTP.

The customer needs to white-list the two nodes on their mail server.

NO.23 Before starting a base installation on an AFF A400, you need to find out the default cluster interconnect ports for the AFF A400 controllers.
In this scenario, which three resources would you use to find this information? (Choose three.)

Hardware Universe (HWU)

Interoperability Matrix Tool (IMT)

hardware installation setup poster

AFF FAS Documentation Center

Active IQ Unified Manager

NO.24 You are deploying a cluster with four AFF A300 nodes and Cisco 3232C switches. When you arrive at the customer’s site, you notice that there are multiple breakout cables and four Cisco 3232C switches. In this scenario, which statement is true?

A 4-node AFF A300 cluster requires four Cisco 3232C switches.

Cisco best practices require four Cisco 3232C switches for high availability.

A 4-node AFF A300 cluster requires two Cisco 3232C switches for the cluster interconnect and two for management.

Your customer ordered a MetroCluster IP configuration.

NO.25 You are cabling two Cisco 3232C switches for the cluster interconnect of a 4-node AFF A800 cluster.
Which pair of ports are used to cable the Inter-Switch Link (ISL) between the switches?

1/21 to 1/24

0/13 to 0/16

1/31 and 1/32

0/1 and 0/2

NO.26 You complete a hardware installation on a CN1610 switch and establish a serial connection to the RJ45 port.
In this scenario, the established serial connection allows the installer to complete which two tasks for the switches initial configuration? (Choose two.)

to view network information that has been dynamically assigned to the management interface by the DHCP server on the network

to use the serial port connection as a diagnostic channel to the second CN1610 switch in the cluster interconnect

to configure the switch with another CN1610 switch using Cross-Stack EtherChannel configuration for load balancing and performance

to manually configure the static network information

NO.27 You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?

BGP

broadcast domains

routing

IPspaces

NO.28 A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)

the ability to move the volumes from the old nodes to the new nodes

the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s

the ability to create a 4-node MetroCluster across the four nodes

the ability to convert the FAS2520s to disk shelves and attach them to the new nodes

NO.29 After setting up a new cluster, you run an AutoSupport message for a test.
Which two commands would you use to proof the functionality and settings of AutoSupport? (Choose two.)

system node autosupport show

system node autosupport history show

system node autosupport option show

system node autosupport show history

NO.30 Which statement about LIFs is true?

Cluster LIFs and data LIFs can share a port.

One cluster-management LIF exists per node.

One port can host multiple data LIFs.

A data LIF can be associated with multiple SVMs.

NO.31 You are installing a new FAS2750 cluster with 24 HDDs for a customer to run a NAS workload. The customer requests that the HA pair have only a single aggregate that is located on Node 1. Maximum capacity is required.
Which action must be performed to ensure that the customer’s requests are satisfied?

Perform a takeover of Node 2 to ensure that it does not run.

Assign all data LIFs to Node 1.

Assign all the partitioned disks from Node 2 to Node 1, and create a single aggregate.

Assign all the data partitions from Node 2 to Node 1, and create a single aggregate.

NO.32 Click the Exhibit button.

A customer has a 2-node FAS8200 cluster with four DS212C shelves with 10 TB SATA drives.
Referring to the exhibit, an aggregate will be created with which default RAID type?

RAID_DP

RAID_TEC

RAID4

RAID1

NO.33 Click the Exhibit button.

Your ONTAP cluster shows the cluster network errors that are shown in the event log. What is used by ONTAP software to log the errors that are shown in the exhibit?

SNMP

AutoSupport

BGP

EMS

NO.34 You have set up a new 2-node switchless cluster and want to verify that the failover is configured correctly.
In this scenario, which two commands accomplish this task? (Choose two.)

cluster ha show

storage failover show

cluster ring show

storage failover show-takeover

NO.35 You have just racked a new 6-node switched cluster with ONTAP 9.7. You need to configure the cluster switches.
In this scenario, which two elements would be used to complete the configuration? (Choose two.)

SFP+ port

rlogin

SSH

serial port

NO.36 You finished a new installation and executed Config Advisor successfully. You review the physical racking and cabling on one of the controllers, and notice an amber light that was not previously on.
Which two actions should you perform before you turn over the cluster for production? (Choose two.)

Remove cables connected to the controller until you find the one responsible for the controller issue.

Review AutoSupport messages which could explain the controller state.

Execute Config Advisor again to check for new errors.

Let the customer know the cluster is operating normally while the amber LED is on.

NO.37 A customer wants you to add a new AFF A700 HA pair to an existing 4-node AFF8080 EX cluster. The existing cluster uses NetApp CN1610 switches for the cluster connection and is using the recommended port count.
Which statement is true in this scenario?

You cannot have more than four nodes with AFF.

There are not enough ports available on the cluster switch.

The AFF A700 is not supported with NetApp CN1610 switches/

You cannot mix different AFF models in the same cluster.

NO.38 You completed an ONTAP cluster deployment as a reseller engineer. During the knowledge transfer process to the customer, they ask for proof that the array has correct multi-path HA cabling deployed and that the array is error free.
Which documentation output would you present to the customer to satisfy this requirement?

Active IQ Unified Manager output

NetAppDocs output

Config Advisor output

Active IQ OneCollect output

NO.39 Which hot-swappable transceiver is required to obtain full performance from a Cisco Nexus 3232C cluster-interconnect switch?

QSFP28

QSFP+

SFP+

SFP

NO.40 You have an AFF A400 cluster that is running ONTAP 9.7 software. You are asked to set up FlexCache for NFS volumes.
In this scenario, which statement is correct when implementing FlexCache?

A capacity license is required.

A subscription license is required.

A site license is required.

No license is required.

NO.41 You must replace a FAS2750 switchless cluster with an AFF A220 switchless cluster for a customer. The customer requires that you transfer the data from the FAS2750 cluster to the AFF A220.
In this scenario, which two methods would you use to migrate the customer’s data? (Choose two.)

Establish an SVM-DR relationship between the two clusters and activate the destination SVM.

Remove all of the HDD drives from the FAS cluster and install them into the AFF cluster.

Install SAS cables between the two clusters and use the vol move command.

Provide cluster switches and build a 4-node cluster, then use the vol move command.