[Oct 29, 2023] Get Up-To-Date Real Exam Questions for NSE5_FMG-7.0 with New Materials [Q22-Q42]

Rate this post

[Oct 29, 2023] Get Up-To-Date Real Exam Questions for NSE5_FMG-7.0 with New Materials

Updated NSE5_FMG-7.0 Certification Exam Sample Questions

Fortinet NSE5_FMG-7.0 certification exam is designed to test the skills and knowledge of IT professionals who are responsible for managing and configuring Fortinet security solutions. NSE5_FMG-7.0 exam focuses on FortiManager 7.0, which is a centralized security management platform that allows administrators to manage and configure multiple Fortinet devices from a single console.

NO.22 An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?

First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route

You must specify a gateway address when you create a default static route

Remove all the interface references such as routes or policies

Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

NO.23 Refer to the exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

It allows two or more administrators to make configuration changes at the same time, in the same ADOM.

It disables concurrent read-write access to an ADOM.

It allows the same administrator to lock more than one ADOM at the same time.

It is used to validate administrator login attempts through external servers.

NO.24 What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

NO.25 An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

NO.26 Which three settings are the factory default settings on FortiManager? (Choose three.)

Username is admin

Password is fortinet

FortiAnalyzer features are disabled

Reports and Event Monitor panes are enabled

port1 interface IP address is 192.168.1.99/24

NO.27 An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

NO.28 View the following exhibit.

Which one of the following statements is true regarding the object named ALL?

FortiManager updated the object ALL using FortiGate’s value in its database

FortiManager updated the object ALL using FortiManager’s value in its database

FortiManager created the object ALL as a unique entity in its database, which can be only used by this
managed FortiGate.

FortiManager installed the object ALL with the updated value.

NO.29 What will be the result of reverting to a previous revision version in the revision history?

It will install configuration changes to managed device automatically

It will tag the device settings status as Auto-Update

It will generate a new version ID and remove all other revision history versions

It will modify the device-level database

NO.30 An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NO.31 When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

NO.32 An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?

File system

ADOM1

ADOM2 object database

ADOM2

NO.33 Which two statements regarding device management on FortiManager are true? (Choose two.)

FortiGate devices in HA cluster devices are counted as a single device.

FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.

FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.

The maximum number of managed devices for each ADOM is 500.

NO.34 Refer to the exhibit.

Which two statements are true if the script is executed using the Device Database option? (Choose two.)

You must install these changes using the Install Wizard to a managed device

The successful execution of a script on the Device Database will create a new revision history

The script history will show successful installation of the script on the remote FortiGate

The Device Settings Status will be tagged as Modified

NO.35 In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually
reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

NO.36 Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

NO.37 Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

Managed gateways are devices managed by FortiManager in the same ADOM

External gateways are third-party VPN gateway devices only

Protected subnets are the subnets behind the device that you don’t want to allow access to over the IPsec
VPN

Managed devices in other ADOMs must be treated as external gateways

NO.38 When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

NO.39 An administrator would like to create an SD-WAN default static route for a newly created SD-WAN using the FortiManager GUI. Both port1 and port2 are part of the SD-WAN member interfaces.
Which interface must the administrator select in the static route device drop-down list?

port2

virtual-wan-link

port1

auto-discovery

NO.40 View the following exhibit.

An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies will be installed on FortiGate

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies in policy package will be deleted from the

NO.41 An administrator configures a new firewall policy on FortiManager and has not yet pushed the changes to the
managed FortiGate.
In which database will the configuration be saved?

Device-level database

Revision history database

ADOM-level database

Configuration-level database

NO.42 Which configuration setting for FortiGate is part of an ADOM-level database on FortiManager?

NSX-T Service Template

Security profiles

SNMP

Routing