Latest Fortinet NSE5_FAZ-7.0 Free Certification Exam Material with 116 Q&As [Q49-Q64]

Rate this post

Latest Fortinet NSE5_FAZ-7.0 Free Certification Exam Material with 116 Q&As

UPDATED NSE5_FAZ-7.0 Exam Questions Certification Test Engine to PDF

The NSE5_FAZ-7.0 exam is intended for network administrators, security professionals, and anyone responsible for managing network security operations. NSE5_FAZ-7.0 exam is also suitable for individuals who want to enhance their knowledge and skills in network security and Fortinet’s products. NSE5_FAZ-7.0 exam is a prerequisite for the Fortinet NSE 5 certification, which validates the candidate’s ability to use Fortinet’s security products to protect networks against threats and vulnerabilities.

QUESTION 49
Which statements are correct regarding FortiAnalyzer reports? (Choose two)

FortiAnalyzer provides the ability to create custom reports.

FortiAnalyzer glows you to schedule reports to run.

FortiAnalyzer includes pre-defined reports only.

FortiAnalyzer allows reporting for FortiGate devices only.

QUESTION 50
What are offline logs on FortiAnalyzer?

Compressed logs, which are also known as archive logs, are considered to be offline logs.

When you restart FortiAnalyzer. all stored logs are considered to be offline logs.

Logs that are indexed and stored in the SQL database.

Logs that are collected from offline devices after they boot up.

Reference:
Logs are received and saved in a log file on the FortiAnalyzer disks. Eventually, when the log file reaches a configured size, or at a set schedule, it is rolled over by being renamed. These files (rolled or otherwise) are known as archive logs and are considered offline so they don’t offer immediate analytic support. Combined, they count toward the archive quota and retention limits, and they are deleted based on the ADOM data policy. FortiAnalyzer_7.0_Study_Guide-Online page 140

QUESTION 51
Refer to the exhibit.

Which image corresponds to the packet capture shown in the exhibit?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 52
An administrator has configured the following settings:
config system fortiview settings
set resolve-ip enable
end
What is the significance of executing this command?

Use this command only if the source IP addresses are not resolved on FortiGate.

It resolves the source and destination IP addresses to a hostname in FortiView on FortiAnalyzer.

You must configure local DNS servers on FortiGate for this command to resolve IP addresses on Forti Analyzer.

It resolves the destination IP address to a hostname in FortiView on FortiAnalyzer.

QUESTION 53
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)

A local wildcard administrator account

A remote LDAP server

A trusted host profile that restricts access to the LDAP group

An administrator group

QUESTION 54
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate with IPsec? (Choose two.)

Must configure the FortiAnalyzer end of the tunnel only–the FortiGate end is auto-negotiated.

Must establish an IPsec tunnel ID and pre-shared key.

IPsec cannot be enabled if SSL is enabled as well.

IPsec is only enabled through the CLI on FortiAnalyzer.

Option B is correct because you must establish an IPsec tunnel ID and pre-shared key to secure the communication between FortiAnalyzer and FortiGate with IPsec12. The tunnel ID is a unique identifier for each tunnel and the pre-shared key is a secret passphrase that authenticates the peers.
Option D is correct because IPsec is only enabled through the CLI on FortiAnalyzer1. You cannot configure IPsec settings through the GUI on FortiAnalyzer.

QUESTION 55
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?

The configured IP address is checked first.

The active port number is checked first.

The firmware version is checked first.

The configured priority is checked first

In the case of a primary device failure, FortiAnalyzer HA uses the following rules to select a new primary:
* All cluster devices are assigned a priority from 80 to 120. The default priority is 100. If the primary device becomes unavailable, the device with the highest priority is selected as the new primary device. For example, a device with a priority of 110 is selected over a device with a priority of 100.
* If multiple devices have the same priority, the device whose primary IP address has the greatest value is selected as the new primary device. For example, 123.45.67.124 is selected over 123.45.67.123.
* If a new device with a higher priority or a greater value IP address joins the cluster, the new device does not replace (or pre-empt) the current primary device automatically.
FortiAnalyzer_7.0_Study_Guide-Online page 62

QUESTION 56
Which two statements are true regarding fabric connectors? (Choose two.)

Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more efficient than third-party information from the FortiAnalyzer API.

Fabric connectors allow to save storage costs and improve redundancy.

Storage connector service does not require a separate license to send logs to cloud platform.

Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3, Azure Blob , and Google Cloud.

QUESTION 57
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?

Hot swap the disk.

There is no need to do anything because the disk will self-recover.

Run execute format disk to format and restart the FortiAnalyzer device.

Shut down FortiAnalyzer and replace the disk

https://kb.fortinet.com/kb/documentLink.do?externalID=FD46446#:~:text=On%20FortiAnalyzer%2FFortiManager%20devices%20that,to%20exchanging%20the%20hard%20disk.
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running – known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk.

QUESTION 58
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?

Fortinet is assigned the Standard_ User administrator profile.

A trusted host is configured.

ADOM mode is configured with Advanced mode.

Fortinet is assigned the Restricted_ User administrator profile.

QUESTION 59
On FortiAnalyzer, what is a wildcard administrator account?

An account that permits access to members of an LDAP group

An account that allows guest access with read-only privileges

An account that requires two-factor authentication

An account that validates against any user account on a FortiAuthenticator

https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/747268/configuring-wildcard-admin-accounts

QUESTION 60
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?

Chart Builder

Export to Report Chart

Dataset Library

Custom View

https://docs.fortinet.com/document/fortianalyzer/6.2.0/cookbook/989203/building-charts-with-chart-builder

QUESTION 61
How can you configure FortiAnalyzer to permit administrator logins from only specific locations?

Use static routes

Use administrative profiles

Use trusted hosts

Use secure protocols

https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/186508/trusted-hosts

QUESTION 62
Refer to the exhibit.

Laptopt is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than “admin” and coming from Laptop1:
Which filter will achieve the desired result?

operation-login & performed_on==”GUI(10.1.1.100)” & user!=admin

operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin

operation-login & dstip==10.1.1.210 & userl-admin

operation-login & performed_on==”GUI(10.1.1.210)’ & user!=admin

On there the task was to create a filter for failed logins from any other location but the local computer: “Add the text performed_on!~10.0.1.10. This includes any attempts coming from devices with an IP address that is not the one configured on the Local-Client computer.”

QUESTION 63
What is Log Insert Lag Time on FortiAnalyzer?

The number of times in the logs where end users experienced slowness while accessing resources.

The amount of lag time that occurs when the administrator is rebuilding the ADOM database.

The amount of time that passes between the time a log was received and when it was indexed on FortiAnalyzer.

The amount of time FortiAnalyzer takes to receive logs from a registered device

QUESTION 64
Which two statements express the advantages of grouping similar reports? (Choose two.)

Improve report completion time.

Conserve disk space on FortiAnalyzer by grouping multiple similar reports.

Reduce the number of hcache tables and improve auto-hcache completion time.

Provides a better summary of reports.

Loading …

Fortinet NSE5_FAZ-7.0 exam is a challenging test that requires candidates to have a good understanding of network security, event analysis, and management. It covers topics such as data collection, event correlation, report generation, and event analysis. Candidates will be tested on their ability to use FortiAnalyzer 7.0 to configure and manage network security events, as well as their knowledge of security policies, VPNs, and firewalls.

Get The Important Preparation Guide With NSE5_FAZ-7.0 Dumps: https://www.real4exams.com/NSE5_FAZ-7.0_braindumps.html