[2024] Use Real Cisco Dumps - 100% Free 300-410 Exam Dumps [Q317-Q337]

Rate this post

[2024] Use Real Cisco Dumps – 100% Free 300-410 Exam Dumps

Realistic 300-410 Dumps Latest Cisco Practice Tests Dumps

Cisco 300-410 exam is intended for professionals who have a strong understanding of networking technologies and experience in implementing and managing enterprise networks. Candidates should have a solid understanding of routing protocols such as OSPF, EIGRP, and BGP, as well as the ability to configure and troubleshoot network services such as NAT, DHCP, and VPNs. Additionally, candidates should have experience with network automation tools and techniques, as well as the ability to design and implement highly available and scalable network solutions. Passing the Cisco 300-410 exam is a valuable achievement for IT professionals who are seeking to advance their careers in enterprise networking.

NO.317 Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.

NO.318 How are MPLS Layer 3 VPN services deployed?

The RD and RT values must match under the VRR

The RD and RT values under a VRF must match on the remote PE router

The import and export RT values under a VRF must always be the same.

The label switch path must be available between the local and remote PE routers.

NO.319 Refer to the exhibit.

The network administrator configured the network to connect two disjointed networks and ail the connectivity is up except the virtual link which causes area 250 to be unreachable. Which two configurations resolve this issue? (Choose two.)

R2
router ospf 1
router-id 10.23.23.2

R2
router ospf 1
no area area 234 virtual-link 10.34.34.4
area 0 virtual-link 0.0.0.44

R4
router ospf 1
no area 234 virtual-link 10.23.23.2
area 234 virtual-link 0.0.0.22

R2
router ospf 1
no area 234 virtual-link 10.34.34.4
area 234 virtual-link 0.0.0.44

R4
router ospf 1
no area area 234 virtual-link 10.23.23.2
area 0 virtual-link 0.0.0.22

NO.320 Refer to the exhibit.

ISP 1 and ISP 2 directly connect to the Internet. A customer is tracking both ISP links to achieve redundancy and cannot see the Cisco IOS IP SLA tracking output on the router console. Which command is missing from the IP SLA configuration?

Start-time 00:00

Start-time 0

Start-time immediately

Start-time now

NO.321 Refer to the exhibit.

Network operations cannot read or write any configuration on the device with this configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)

Configure SNMP rw permission in addition to community ciscotest.

Modify access list 1 and allow operations subnet in the access list.

Modify access list 1 and allow SNMP in the access list.

Configure SNMP rw permission in addition to version 1.

Configure SNMP rw permission in addition to community ciscotest 1.

NO.322 Refer to the exhibit.

An engineer is troubleshooting BGP on a device but discovers that the clock on the device does not correspond to the time stamp of the log entries. Which action ensures consistency between the two times?

Configure the service timestamps log uptime command in global configuration mode.

Configure the logging clock synchronize command in global configuration mode.

Configure the service timestamps log datetime localtime command in global configuration mode.

Make sure that the clock on the device is synchronized with an NTP server.

NO.323

Refer to the exhibit. An engineer configured BGP and wants to select the path from 10.77.255.57 as the best path instead of current best path. Which action resolves the issue?

Configure AS_PATH prepend for the desired best path

Configure higher MED to select as the best path.

Configure lower LOCAL_PREF to select as the best path.

Configure AS_PATH prepend for the current best path

NO.324 Drag and drop the actions from the left into the correct order on the right to configure a policy to avoid following packet forwarding based on the normal routing path.

NO.325 Refer to the exhibit.

A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?

The local preference value in another neighbor statement is higher than 250.

The local preference value should be set to the same value as the weight in the route map.

The route map is applied in the wrong direction.

The weight value in another statement is higher than 200.

NO.326 Refer to the exhibit.

An engineer configures two ASBRs 10 4 17.6 and 10 4 15 5 in an OSPF network to redistribute routes from EIGRP However, both ASBRs show the EIGRP routes as equal costs even though the next-hop router 10 4 17 6 is closer to R1 How should the network traffic to the EIGRP prefixes be sent via 10 4.17.6?

The admitstrative distance should be raised to 120 from the ASBR 104 15.5.

The redistributed prefixes should be advertised as Type 1.

The ASBR 10 4 17 6 should assign a tag to match and assign a tower metnc on R1

The administrative distance should be raised to 120 from the ASBR 104 17 6

NO.327 Refer to the exhibit.

An engineer is trying to configure local authentication on the console line, but the device is trying to authenticate using TACACS+. Which action produces the desired configuration?

Add the aaa authentication login default none command to the global configuration.

Replace the capital “C” with a lowercase “c” in the aaa authentication login Console local command.

Add the aaa authentication login default group tacacs+ local-case command to the global configuration.

Add the login authentication Console command to the line configuration

NO.328 Refer to the exhibit.

After a new regional office is set up,not all guests can access the internet via guest Wi Fi. Clients are getting the correct IP address from guest Wi-Fi VLAN 364. which action resolves the issue ?

Allow 10.66.46.0/23 in the outbound ACL

Allow DNS traffic through the outbound ACL

Allow DNS traffic through the inbound ACL

Allow 10.66.46.0/23 in the inbound ACL

NO.329 Refer to the exhibit.

What is the result of applying this configuration?

The router can form BGP neighborships with any other device.

The router cannot form BGP neighborships with any other device.

The router cannot form BGP neighborships with any device that is matched by the access list named
“BGP”.

The router can form BGP neighborships with any device that is matched by the access list named
“BGP”.

NO.330 Refer to the exhibit.

Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed

NO.331 What is LDP label binding?

neighboring router with label

source prefix with label

destination prefix with label

two routers with label distribution session

NO.332 Refer to the exhibit.

An administrator is attempting to disable the automatic logout after a period of inactivity. After logging out the console stopped responding to all keyword inputs. Remote access through SSH still work resolves the issue?

Configure the exec command on line con 0.

Configure the absolute-timeout command on line con 0.

Configure the default exec-timeout command on line con 0.

Configure the no exec-timeout command on line con 0.

NO.333 Refer to the exhibit.

What is the result if applying this configuration?

The router can form BGP neighborships with any other device.

The router can form BGP neighborships with any device that matched by the access list named ”BGP”

The router cannot form BGP neighborships with any other device

The router cannot form BGP neighborships with any device that is matched by the access list named ”BGP”

NO.334 Refer to the exhibit.

Which interface configuration must be configured on the spoke A router to enable a dynamic DMVPN tunnel with the spoke B router?